par papy49 » 27 Novembre 2010, 14:03
Bonjour
voici la premiere réponse que j'obtient à mon message d'hier soir
Someone else may know a quick answer. If there is none, then you may have to restart the ECoS in Rescue Mode. See page 40 of the colour ECoS Manual. You hold down buttons F2 and F7 on the left side and connect the power to the ECoS while you keep the buttons held down. The english version of the manual and the original release notes for firmware version 3.0.0 are both incorrect as they both say buttons F1 and F6, ESU have confirmed that it should be F2 and F7.
You will then have to reinstall either your previous firmware version or the one that you were trying to install.
Rescue mode does work as I have already done it once on my colour ECoS, and the process is the same for a mono ECoS running Firmware 3.0.0 or above.
UN PETIT COUP D AIDE d AUTRES MEMBRES DU SITE MERCI POUR LA TRADUCTION BIEN COMPRISE ET NON PAS COMPRISE EN DIAGONALE EN CE QUI ME CONCERNE MERCI
J'ai quand meme demandé avec mon anglais si VRAIMENT cette procédure s'appliquait à l ecos NB
[url]http://www.esu.eu/forum/forenuebersicht/topic/ecos_support-1/ecos_50000/seite/1/#pid47152[/url]
ATTENTION IL VOUS FAUT ETRE A PRIORI "LOGuE" SUR LE SITE ESU POUR ACCEDER A LA REPONSE
A SUIVRE
Another Webmaster of Espace Rails (Rédactor), Eric LIMOUSIN Alias Raoul VOLFONI.Ecos 50000 V 3.6 + Ecos Control Radio + sniffer ArnoldDigital 86201et86210, Switchpilot x 7, RMGB8-LDT x 3, LS 150 X 1 pilotés en retrosignalisati